Interface

36 Spring 2022 HEALTH & SAFETY The Managing Director and the Director of a printing company have been fined for safety breaches after organising the removal of asbestos insulation boards by untrained personnel. Leeds Magistrates’ Court heard how Charles Dunn and Jeremy Mills, respectively the Managing Director and Director of D&M Heritage Limited, consented to work taking place at the company’s premises which failed to use adequate measures to prevent the spread of asbestos. An investigation by the Health and Safety Executive (HSE) found that the company rented space in a warehouse at Red Doles Lane in Huddersfield and had been given notice to leave by the new owners. Prior to leaving, the company agreed to remove some free-standing cupboards. A licensed removal company, who had carried out work previously at the site, had told the directors of D&M Heritage Ltd that the rear of a cupboard was broken and was likely to be asbestos. The cupboards consisted of doors made with asbestos insulation board (AIB) and the rear of the cupboards also contained AIB. The cupboards were broken up during removal, releasing asbestos fibres. Some pieces were placed in bags, others placed in a nearby skip. Charles Dunn of Mill Lane, Mixenden, Halifax pleaded guilty to breaching Section 37 of the Health & Safety at Work Act (due to Reg 11 of Control of Asbestos Regulations 2012) and a second charge of breaching Section 37 of the Health & Safety at Work Act (due to Reg 16 of Control of Asbestos Regulations 2012). He was fined £916 and ordered to pay £5,000 in costs. Jeremy Mills of Occupation Road, Linley, Huddersfield pleaded guilty to breaching Section 37 of the Health & Safety at Work Act (due to Reg 11 of Control of Asbestos Regulations 2012) and a second charge of breaching Section 37 of the Health & Safety at Work Act (due to Reg 16 of Control of Asbestos Regulations 2012). He was fined £1,600 and ordered to pay £10,000 in costs. DIRECTORS FINED FOR UNLICENSED ASBESTOS REMOVAL A construction company has been fined after an employee died as a result of falling from a mobile tower. Cambridge Magistrates Court heard how Sean Harding was working from a mobile tower levelling a steel beam that was seated on a door lintel. This involved using a crowbar to lever the beam up for a work colleague to insert a metal packer into the gap. Mr Harding caught his jacket sleeve on the tower, lost balance and fell over a single guard rail and down to ground level. He was taken to hospital but died three months later due to medical complications. An investigation by Health and Safety Executive (HSE) found that the mobile tower wasn’t configured correctly for the task due to the limited headroom and that double guard rails could have been used, if configured correctly. Peter Saunders Builders Ltd of Tennyson House, Cambridge Business Park, Cambridge pleaded guilty to breaching Regulation 8 (a) of the Work at Height Regulations 2005 and was fined £16,000 with £5,139.80 costs. CONSTRUCTION WORKER DIES AFTER FALLING FROM TOWER