ACR Journal

CMYK / .ai CMYK / .ai CMYK / .ai acrjournal.uk 25 REFRIGERANT OILS "Desiccants are hygroscopic substances that are used to absorb moisture and other particulates, to sustain a dry (moisture free) environment." dyes without compromising on moisture introduction…it is also clean and mess free from the operator installing the dye. The newly launched DMH Filter Drier Series contains a fibreglass mesh, to safely stop swarf and particulates from circulating around the system, damaging, or blocking components. The DMH solder variants are manufacturer with 20% more copper, o ering more space for the engineer to braze without damaging the drier casing or surrounding copper tubing. Dry All components including the new TW filter driers are available from the following stockists: No stockists listed <subhead> Proof is in the testing We have a limited number of FREE samples on offer across 032S, 032F, 053S, 053F and Replaceable Drier Types. To trial your FREE sample or schedule a FREE onsite consultation. Register by visiting: https://www.dryall.co.uk and 3: compressor manufacturer approved. <subhead> What makes a good filter drier? Component manufacturer Dry All aims to offer the most value possible within its high-quality mig-welded filter driers. This company works with companies including Emerson, Carrier, Bosch, Daikin, LG, Schneider and more. These companies approve Dry All HVAC&R line components. Dry All has gone to great lengths to ensure quality throughout its product and offer new innovative ways to offer exceptional value, in product performance and service support. One of its latest innovations includes Spectro line UV-Dye wafers being built into their filter driers. This is a world-first filter drier with leak detection technology built-in. UV-Dye - Wafer Type • Tracer Wafer (TW) Pre-charged with Fluorescent Dye • OEM Approved Dye • No POE-based Cartridge • No Installation Mess • Most Cost-Effective Leak Detection Method • Most Efficient Leak Finding Capabilities • Dilution Ratio 1:500 Filter Drier – Bead Type • MIG Welded Housing • Spring Loaded Desiccant Beads - No Glue • Perfect Molecular Sieve and Activated Alumina Ratio 70:30 • Fibreglass Mesh • Unrestricted Refrigerant Flow • More Protection • Most Cost-Effective Drier Type and 3: compress r manufacturer pproved. <subhead> What makes a good filter drier? Component ma ufacturer Dry All aims to offer he mos value possible within its high-qual ty mig-welded filter driers. This company works with companies including Emerson, Ca rier Bosch, Daikin, LG, Schneider and more. These companies a prove Dry All HVAC&R line components. Dry All has gone to reat lengths to ensure quality throughout its product and offer ew innovative ways to offer exceptional value, in product performance and service support. One of its latest innova io s includes Spectrolin UV -Dy wafers being built into the r filter d iers. This is a world-first filter drier with leak detection t hnology bui t-in. UV-Dye - Wafer Type • Tracer Wafer (T ) P e-charged with Fluorescent Dye • OEM Approved Dye • No POE-based Cartridge • No Installation Mess • Most Cost-Effective Leak D tection Method • Most Efficien Leak Finding Capabilities • Dilution Ratio 1:500 Filter Drier – Bead Type • MIG Welded Housing • Spring Loaded Desiccant Beads - No Glue • Perfect Molecular Si ve nd Activated Alumina Ratio 70:30 • Fibreglass M sh • Unrestricted Refrig rant Flow • More Protection • Most Cost-Effective Drier Type Filter Drier – Bead Type • MIGWelded Housing • Spring Loaded Desiccant Beads - No Glue • Perfect Molecular Sieve and Activated Alumina Ratio 70:30 • Fibreglass Mesh • Unrestricted Refrigerant Flow • More Protection • Most Cost-Effective Drier Type UV-Dye - Wafer Type • Tracer Wafer (TW) Pre-ch rged with Fluorescent Dye • OEM Approved Dye • No POE-based Cartridge • No Installation Mess • Most Cost-Effective Leak Detection Method • Most Efficient Leak Finding Capabilities • Dilution Ratio 1:500 Many solid cores require glue to stick the desiccants together. DMH filters do away with this by installing larger beads which are held in place with a spring. This maximises the desiccants’ ability to remove moisture and acid and allows refrigerant to flow freely with our limitation. The DMH series is available with or without UV-Dye… the choice is up to the user. For those readers interested in how the UV-dye versions work, read below: How does it work? As the free-flowing refrigerant and oil passes over the wafer through the filter drier, the dye is released and is transported by the refrigerant and oil. As the dye circulates around the system it mixes with the host oil, in this example POE- oil. This method on introducing the dye o ers the least amount of impact on the oil and reduces moisture from entering the system. Once installed the drier will begin absorb and uptake in moisture. See diagram below. Dry All components including the new TW filter driers are available from the following stockists: No stockists listed Proof is in the testing We have a limited number of FREE samples on o er across 032S, 032F, 053S, 053F and Replaceable Drier Types. To trial your FREE sample or schedule a FREE onsite consultation. Register by visiting: https://www.dryall.co.uk