ACR Journal

CMYK / .ai CMYK / .ai CMYK / .ai acrjournal.uk ADVERTORIAL 23 A key objective since Hydratech’s formation in 1998, has been the establishment of technical partnerships with those responsible for plant design, installation, and operation - to ensure cooling system optimisation. Hydratech’s fluid approach to improving cooling e ciency and reducing energy costs The UK’s leading formulator and manufacturer of high-performance heat transfer fluids, work with the likes of Arla, Warburtons, Waitrose, McCain, Brewdog, Waitrose, Lidl and Aggreko to implement a fully integrated approach to cooling fluid management - which in turn, maximises the potential for optimised performance, reduced operational costs and significant return on investment gains. Hydratech’s fluid approach to process and hydronic system optimisation encompasses: Fluid Selection Heat transfer fluid characteristics (process coolants, secondary refrigerants, glycols etc) have a direct and long-lasting impact on system performance, production output, energy consumption, maintenance and down-time. E cient thermal energy transfer, minimal pumping-energy consumption, long-term preservation of pipework/system components, cost, and minimal environmental impact, all need to be considered when selecting the optimum fluid for cooling systems. Hydratech work with RAC consultants to understand individual system design, thermal and pumping demands. Fluid thermodynamics, toxicity, corrosion chemistry and aerobic bacteria, are all key considerations when selecting an appropriate formulation, mixing ratio and compatible inhibitor package. Proven to reduce energy costs by >10% (as verified by Star Technical Services), Coolflow DTX is a revolutionary secondary refrigerant, suitable for replacing propylene glycol in food and cold storage cooling systems. Performance wise, DTX has very similar heat transfer and pumping characteristics to ethylene glycol and subsequently benefits from numerous operating advantages such as low viscosity, low dose rates and smaller systems and plant footprints onsite. By retrofitting existing systems - moving from propylene glycol to DTX, many of the UK’s leading processing, manufacturing and logistics operations have reported improved performance and e ciency gains, alongside considerable energy/cost/CO2 savings. Fluid Monitoring Based on many years of experience, it is not uncommon for the maintenance of cooling and heating systems to be overlooked. Under such circumstances various issues can develop, including advanced corrosion, biological fouling and sediment formation. All of which will have a direct and negative impact on heat transfer e ciency, pumping performance and energy consumption. Hydratech’s in-house laboratory carries out analytical fluid testing of cooling system fluids, primarily microbiological and chemistry testing - to identify water contaminates, bacterial presence, water treatment levels or the make-up of elements. By taking a proactive approach to fluid analysis, those responsible for managing or maintaining CHW systems can detect issues early and take remedial action before fluid e ciency and system condition are compromised. Even when heat transfer fluids have been carefully selected and commissioned, they can still be prone to degradation - leading to loss of heat transfer capacity, unplanned maintenance, and costly shutdowns. Fluid Management Hydratech Fluid Management Services (FMS) provides specialist engineering and maintenance services to customers installing, commissioning, operating, or optimising large cooling and heating systems. By combining expertise in water-treatment chemistry, fluid-thermodynamics, and mechanical engineering, Hydratech FMS division delivers a fully integrated approach to hydronic systems management. This in- turn maximises the potential for optimised performance, reduced operational costs and maximum return on investment. Specialist hydronic pipework services include: • Flushing & pre-commission cleaning of new systems. • Filling, venting and pressure testing. • Fluid testing & analysis. • Reconditioning & remediation of contaminated systems. • Design, manufacture and installation of side-stream filtration. • Inhibitor treatment of water-based heat transfer fluids. Typical hydronic systems worked-on include, process cooling, secondary refrigeration, chilled storage, beverage dispense, renewable energy, process heating, air-conditioning and data centre cooling. Hydratech’s team of account managers, chemists and service engineers can assist with all aspects of heat transfer fluid performance, running costs, environmental impact, compatibility, and energy e ciency. Call: 01792 586800 or email: info@hydratech.co.uk Hydratech Side Stream Filtration Unit