Modern Building Services

MODERN BUILDING SERVICES JUNE 2021 15 FEATURE EFFICIENCYVS OVER ENGINEERING How can over-engineering be overcome? Data is one of the options that has the potential to prevent over- engineering. The construction industry’s digital maturity is developing day-by-day, with more and more companies finding they now have the appetite to utilise different technologies. There is certainly the cultural appetite to make data sharing a viable solution to over-engineering. For the very first time we are seeing the GLA (Greater London Authority) request the data capture of meters to accurately benchmark the schemes that are being implemented in a specific area. Should this be successful, the industry will be able to learn from this and see the real-time electrical performance of a building. To highlight data’s benefits, let’s take an example. On a residential high-rise development comprising 400 flats, from the initial calculations it is clear the development requires 1000kw of electrics. But what if designers had access to meter data from previous developments?Would this visibility enable them to make more accurate predictions? If there was, for instance, the data to monitor the actual use over the course of three years, it might show us that only 600kw is being demanded. Consider the extent in which this would help designers to anticipate expected loads with greater confidence and reliability. Even the smallest change in pipework length or cable size has a knock-on effect on a building’s entire system; from the insulation, to the clips, weight and strength or screws, pump size, and standing heat loss. The list goes on. If we make use of data sharing, engineers could design products more efficiently. The data could then be used as an education tool – to learn from previous projects in order to improve future ones. With data access, designers will be able to ask themselves what they could have done better; if the electric or heating load is accurate, and whether anything else could have been executed to make a product more efficient. The visibility and traceability which data provides would greatly reduce the likelihood of over-engineering, as engineers are able to gauge the predicted energy usage from data that is shared by the electrical supplier. How can we make it a reality? We need to make sure there is the interest and incentive to roll-out this approach to all areas of the industry. In order for this to be delivered across construction efficiently and professionally, legislation would have to be put in place as opposed to advisories. The data would also have to be held in a central repository that is secure; either stored on an online library or made accessible through a reputable industry body. Once it is available the data would have to be listed in the design standards such as CIBSE, IET and the electrical design manuals so the design standards reflect the benchmarks. Whilst there are many ways to overcome over-engineering, the utilisation of data is most certainly a strong case. It will enable designers to have more clarity when it comes to ascertaining how a building performs. If the data is able to capture the actual loads once a building is in use, consider the vast difference it will make to the way engineers consider a scheme’s electrical network. It will offer more reliability for the designers and better value for their clients. More importantly, it will greatly improve the overall efficiency of a building once it is in use, bringing the UK closer to its goal of carbon neutrality. More information can be found at www.whitecodedesign associates.co.uk